Chapter 76
Aluminum and Articles Thereof
By TariffCenter Research Team · Updated 2026-02-07 · Source: USITC Harmonized Tariff Schedule
At a glance
Chapter 76 contains 181 HTS lines covering aluminum and articles thereof. General U.S. duty rates: Free to 6.5%. Section 301 surcharges apply on selected lines for imports from China. Reciprocal tariffs apply following the February 2026 SCOTUS ruling. Section 232 steel/aluminum surcharges apply to selected lines.
7601 — Unwrought aluminum
#Heading 7601 contains 18 HTS lines. General U.S. duty rates: Free–2.6%. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
7601
Unwrought aluminum:
Free
7601.10
Aluminum, not alloyed:
Free
7601.10.30.00
Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
2.6%
7601.10.60
Other
Free
7601.10.60.40
Of 99.9 percent aluminum or greater
Free
7601.10.60.45
Of greater than 99.8 percent but less than 99.9 percent
Free
7601.10.60.90
Other
Free
7601.20
Aluminum alloys:
Free
7601.20.30.00
Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
2.6%
7601.20.60.00
Containing 25 percent or more by weight of silicon
2.1%
7601.20.90
Other
Free
7601.20.90.30
Aluminum vanadium master alloy
Free
7601.20.90.45
Of uniform circular cross section throughout its length, the foregoing comprised of billets, not in coils
Free
7601.20.90.60
Other, containing 0.03 percent or more by weight of lead (secondary aluminum)
Free
7601.20.90.75
Remelt scrap ingot
Free
7601.20.90.80
Sheet ingot (slab) of a kind described in statistical note 3 to this chapter
Free
7601.20.90.85
Foundry ingot of a kind described in statistical note 4 to this chapter
Free
7601.20.90.95
Other
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7601 | Unwrought aluminum: | Free | 301: 25%Recip: 10%S232: 50% |
| 7601.10 | Aluminum, not alloyed: | Free | 301: 25%Recip: 10%S232: 50% |
| 7601.10.30.00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | 2.6% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG) |
| 7601.10.60 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7601.10.60.40 | Of 99.9 percent aluminum or greater | Free | 301: 25%Recip: 10%S232: 50% |
| 7601.10.60.45 | Of greater than 99.8 percent but less than 99.9 percent | Free | 301: 25%Recip: 10%S232: 50% |
| 7601.10.60.90 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7601.20 | Aluminum alloys: | Free | 301: 25%Recip: 10%S232: 50% |
| 7601.20.30.00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | 2.6% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG) |
| 7601.20.60.00 | Containing 25 percent or more by weight of silicon | 2.1% | 301: 25%Recip: 10%hts_special: Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG) |
| 7601.20.90 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7601.20.90.30 | Aluminum vanadium master alloy | Free | 301: 25%Recip: 10%S232: 50% |
| 7601.20.90.45 | Of uniform circular cross section throughout its length, the foregoing comprised of billets, not in coils | Free | 301: 25%Recip: 10%S232: 50% |
| 7601.20.90.60 | Other, containing 0.03 percent or more by weight of lead (secondary aluminum) | Free | 301: 25%Recip: 10%S232: 50% |
| 7601.20.90.75 | Remelt scrap ingot | Free | 301: 25%Recip: 10%S232: 50% |
| 7601.20.90.80 | Sheet ingot (slab) of a kind described in statistical note 3 to this chapter | Free | 301: 25%Recip: 10%S232: 50% |
| 7601.20.90.85 | Foundry ingot of a kind described in statistical note 4 to this chapter | Free | 301: 25%Recip: 10%S232: 50% |
| 7601.20.90.95 | Other | Free | 301: 25%Recip: 10%S232: 50% |
7602 — Aluminum waste and scrap
#Heading 7602 contains 5 HTS lines. General U.S. duty rates: Free. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
7602.00.00
Aluminum waste and scrap
Free
7602.00.00.45
Recyclable aluminum auto and truck wheels
Free
7602.00.00.55
Recyclable aluminum from industrial processes, including turnings, borings, shavings, filings, clippings and chips
Free
7602.00.00.65
Other recyclable aluminum
Free
7602.00.00.75
Other
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7602.00.00 | Aluminum waste and scrap | Free | 301: 25%Recip: 10%S232: 50% |
| 7602.00.00.45 | Recyclable aluminum auto and truck wheels | Free | 301: 25%Recip: 10%S232: 50% |
| 7602.00.00.55 | Recyclable aluminum from industrial processes, including turnings, borings, shavings, filings, clippings and chips | Free | 301: 25%Recip: 10%S232: 50% |
| 7602.00.00.65 | Other recyclable aluminum | Free | 301: 25%Recip: 10%S232: 50% |
| 7602.00.00.75 | Other | Free | 301: 25%Recip: 10%S232: 50% |
7603 — Aluminum powders and flakes
#Heading 7603 contains 3 HTS lines. General U.S. duty rates: Free–5%. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
7603
Aluminum powders and flakes:
Free
7603.10.00.00
Powders of non-lamellar structure
5%
7603.20.00.00
Powders of lamellar structure; flakes
3.9%
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7603 | Aluminum powders and flakes: | Free | 301: 25%Recip: 10%S232: 50% |
| 7603.10.00.00 | Powders of non-lamellar structure | 5% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7603.20.00.00 | Powders of lamellar structure; flakes | 3.9% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
7604 — Aluminum bars, rods and profiles
#Heading 7604 contains 20 HTS lines. General U.S. duty rates: Free–5%. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
7604
Aluminum bars, rods and profiles:
Free
7604.10
Of aluminum, not alloyed:
Free
7604.10.10.00
Profiles
5%
7604.10.30.00
Having a round cross section
2.6%
7604.10.50.00
Other
3%
7604.21.00
Hollow profiles
1.5%
7604.21.00.10
Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter
Free
7604.21.00.90
Other
Free
7604.29
Other:
Free
7604.29.10
Other profiles
5%
7604.29.10.10
Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter
Free
7604.29.10.90
Other
Free
7604.29.30
Having a round cross section
2.6%
7604.29.30.30
High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter
Free
7604.29.30.60
Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter
Free
7604.29.30.90
Other
Free
7604.29.50
Other
3%
7604.29.50.20
High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter
Free
7604.29.50.50
Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter
Free
7604.29.50.90
Other
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7604 | Aluminum bars, rods and profiles: | Free | 301: 25%Recip: 10%S232: 50% |
| 7604.10 | Of aluminum, not alloyed: | Free | 301: 25%Recip: 10%S232: 50% |
| 7604.10.10.00 | Profiles | 5% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7604.10.30.00 | Having a round cross section | 2.6% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7604.10.50.00 | Other | 3% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7604.21.00 | Hollow profiles | 1.5% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG) |
| 7604.21.00.10 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | Free | 301: 25%Recip: 10%S232: 50% |
| 7604.21.00.90 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7604.29 | Other: | Free | 301: 25%Recip: 10%S232: 50% |
| 7604.29.10 | Other profiles | 5% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7604.29.10.10 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | Free | 301: 25%Recip: 10%S232: 50% |
| 7604.29.10.90 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7604.29.30 | Having a round cross section | 2.6% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7604.29.30.30 | High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter | Free | 301: 25%Recip: 10%S232: 50% |
| 7604.29.30.60 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | Free | 301: 25%Recip: 10%S232: 50% |
| 7604.29.30.90 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7604.29.50 | Other | 3% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7604.29.50.20 | High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter | Free | 301: 25%Recip: 10%S232: 50% |
| 7604.29.50.50 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | Free | 301: 25%Recip: 10%S232: 50% |
| 7604.29.50.90 | Other | Free | 301: 25%Recip: 10%S232: 50% |
7605 — Aluminum wire
#Heading 7605 contains 5 HTS lines. General U.S. duty rates: Free–4.2%. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
7605
Aluminum wire:
Free
7605.11.00.00
Of which the maximum cross-sectional dimension exceeds 7 mm
2.6%
7605.19.00.00
Other
4.2%
7605.21.00.00
Of which the maximum cross-sectional dimension exceeds 7 mm
2.6%
7605.29.00.00
Other
4.2%
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7605 | Aluminum wire: | Free | 301: 25%Recip: 10%S232: 50% |
| 7605.11.00.00 | Of which the maximum cross-sectional dimension exceeds 7 mm | 2.6% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7605.19.00.00 | Other | 4.2% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7605.21.00.00 | Of which the maximum cross-sectional dimension exceeds 7 mm | 2.6% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7605.29.00.00 | Other | 4.2% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
7606 — Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm
#Heading 7606 contains 30 HTS lines. General U.S. duty rates: Free–6.5%. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
7606
Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm:
Free
7606.11
Of aluminum, not alloyed:
Free
7606.11.30
Not clad
3%
7606.11.30.30
With a thickness of more than 6.3 mm
Free
7606.11.30.60
With a thickness of 6.3 mm or less
Free
7606.11.60.00
Clad
2.7%
7606.12
Of aluminum alloys:
Free
7606.12.30
Not clad
3%
7606.12.30.15
High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter
Free
7606.12.30.25
Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter
Free
7606.12.30.35
Other
Free
7606.12.30.45
Body stock
Free
7606.12.30.55
Lid stock
Free
7606.12.30.91
Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter
Free
7606.12.30.96
Other
Free
7606.12.60.00
Clad
6.5%
7606.91
Of aluminum, not alloyed:
Free
7606.91.30
Not clad
3%
7606.91.30.55
With a thickness of more than 6.3 mm
Free
7606.91.30.95
With a thickness of 6.3 mm or less
Free
7606.91.60
Clad
2.7%
7606.91.60.55
With a thickness of more than 6.3 mm
Free
7606.91.60.95
With a thickness of 6.3 mm or less
Free
7606.92
Of aluminum alloys:
Free
7606.92.30
Not clad
3%
7606.92.30.25
With a thickness of more than 6.3 mm
Free
7606.92.30.35
With a thickness of 6.3 mm or less
Free
7606.92.60
Clad
6.5%
7606.92.60.55
With a thickness of more than 6.3 mm
Free
7606.92.60.95
With a thickness of 6.3 mm or less
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7606 | Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm: | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.11 | Of aluminum, not alloyed: | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.11.30 | Not clad | 3% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7606.11.30.30 | With a thickness of more than 6.3 mm | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.11.30.60 | With a thickness of 6.3 mm or less | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.11.60.00 | Clad | 2.7% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7606.12 | Of aluminum alloys: | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.12.30 | Not clad | 3% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7606.12.30.15 | High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.12.30.25 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.12.30.35 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.12.30.45 | Body stock | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.12.30.55 | Lid stock | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.12.30.91 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.12.30.96 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.12.60.00 | Clad | 6.5% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7606.91 | Of aluminum, not alloyed: | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.91.30 | Not clad | 3% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7606.91.30.55 | With a thickness of more than 6.3 mm | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.91.30.95 | With a thickness of 6.3 mm or less | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.91.60 | Clad | 2.7% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7606.91.60.55 | With a thickness of more than 6.3 mm | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.91.60.95 | With a thickness of 6.3 mm or less | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.92 | Of aluminum alloys: | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.92.30 | Not clad | 3% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7606.92.30.25 | With a thickness of more than 6.3 mm | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.92.30.35 | With a thickness of 6.3 mm or less | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.92.60 | Clad | 6.5% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7606.92.60.55 | With a thickness of more than 6.3 mm | Free | 301: 25%Recip: 10%S232: 50% |
| 7606.92.60.95 | With a thickness of 6.3 mm or less | Free | 301: 25%Recip: 10%S232: 50% |
7607 — Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm
#Heading 7607 contains 17 HTS lines. General U.S. duty rates: Free–5.8%. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
7607
Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm:
Free
7607.11
Rolled but not further worked:
Free
7607.11.30.00
Of a thickness not exceeding 0.01 mm
5.8%
7607.11.60
Of a thickness exceeding 0.01 mm
5.3%
7607.11.60.10
Boxed aluminum foil weighing not more than 11.3 kg
Free
7607.11.60.90
Other
Free
7607.11.90
Other
3%
7607.11.90.30
Body stock
Free
7607.11.90.60
Lid stock
Free
7607.11.90.90
Other
Free
7607.19
Other:
Free
7607.19.10.00
Etched capacitor foil
5.3%
7607.19.30.00
Cut to shape, of a thickness not exceeding 0.15 mm
5.7%
7607.19.60.00
Other
3%
7607.20
Backed:
Free
7607.20.10.00
Covered or decorated with a character, design, fancy effect or pattern
3.7%
7607.20.50.00
Other
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7607 | Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm: | Free | 301: 25%Recip: 10%S232: 50% |
| 7607.11 | Rolled but not further worked: | Free | 301: 25%Recip: 10%S232: 50% |
| 7607.11.30.00 | Of a thickness not exceeding 0.01 mm | 5.8% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7607.11.60 | Of a thickness exceeding 0.01 mm | 5.3% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7607.11.60.10 | Boxed aluminum foil weighing not more than 11.3 kg | Free | 301: 25%Recip: 10%S232: 50% |
| 7607.11.60.90 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7607.11.90 | Other | 3% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7607.11.90.30 | Body stock | Free | 301: 25%Recip: 10%S232: 50% |
| 7607.11.90.60 | Lid stock | Free | 301: 25%Recip: 10%S232: 50% |
| 7607.11.90.90 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7607.19 | Other: | Free | 301: 25%Recip: 10%S232: 50% |
| 7607.19.10.00 | Etched capacitor foil | 5.3% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7607.19.30.00 | Cut to shape, of a thickness not exceeding 0.15 mm | 5.7% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7607.19.60.00 | Other | 3% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7607.20 | Backed: | Free | 301: 25%Recip: 10%S232: 50% |
| 7607.20.10.00 | Covered or decorated with a character, design, fancy effect or pattern | 3.7% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7607.20.50.00 | Other | Free | 301: 25%Recip: 10%S232: 50% |
7608 — Aluminum tubes and pipes
#Heading 7608 contains 7 HTS lines. General U.S. duty rates: Free–5.7%. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
7608
Aluminum tubes and pipes:
Free
7608.10.00
Of aluminum, not alloyed
5.7%
7608.10.00.30
Seamless
Free
7608.10.00.90
Other
Free
7608.20.00
Of aluminum alloys
5.7%
7608.20.00.30
Seamless
Free
7608.20.00.90
Other
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7608 | Aluminum tubes and pipes: | Free | 301: 25%Recip: 10%S232: 50% |
| 7608.10.00 | Of aluminum, not alloyed | 5.7% | 301: 25%Recip: 10%hts_special: Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7608.10.00.30 | Seamless | Free | 301: 25%Recip: 10%S232: 50% |
| 7608.10.00.90 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7608.20.00 | Of aluminum alloys | 5.7% | 301: 25%Recip: 10%hts_special: Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7608.20.00.30 | Seamless | Free | 301: 25%Recip: 10%S232: 50% |
| 7608.20.00.90 | Other | Free | 301: 25%Recip: 10%S232: 50% |
7609 — Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves)
#Heading 7609 contains 1 HTS line. General U.S. duty rates: 5.7%. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7609.00.00.00 | Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves) | 5.7% | 301: 25%Recip: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
7610 — Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures
#Heading 7610 contains 10 HTS lines. General U.S. duty rates: Free–5.7%. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
7610
Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures:
Free
7610.10.00
Doors, windows and their frames and thresholds for doors
5.7%
7610.10.00.10
Windows and their frames
Free
7610.10.00.20
Thresholds for doors
Free
7610.10.00.30
Other
Free
7610.90.00
Other
5.7%
7610.90.00.20
Sheet-metal roofing, siding, flooring, and roof guttering and drainage equipment
Free
7610.90.00.40
Architectural and ornamental work
Free
7610.90.00.60
Mobile homes
Free
7610.90.00.80
Other
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7610 | Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures: | Free | 301: 25%Recip: 10%S232: 50% |
| 7610.10.00 | Doors, windows and their frames and thresholds for doors | 5.7% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7610.10.00.10 | Windows and their frames | Free | 301: 25%Recip: 10%S232: 50% |
| 7610.10.00.20 | Thresholds for doors | Free | 301: 25%Recip: 10%S232: 50% |
| 7610.10.00.30 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7610.90.00 | Other | 5.7% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7610.90.00.20 | Sheet-metal roofing, siding, flooring, and roof guttering and drainage equipment | Free | 301: 25%Recip: 10%S232: 50% |
| 7610.90.00.40 | Architectural and ornamental work | Free | 301: 25%Recip: 10%S232: 50% |
| 7610.90.00.60 | Mobile homes | Free | 301: 25%Recip: 10%S232: 50% |
| 7610.90.00.80 | Other | Free | 301: 25%Recip: 10%S232: 50% |
7611 — Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
#Heading 7611 contains 3 HTS lines. General U.S. duty rates: Free–2.6%. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
7611.00.00
Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
2.6%
7611.00.00.30
Tanks
Free
7611.00.00.90
Other
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7611.00.00 | Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment | 2.6% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7611.00.00.30 | Tanks | Free | 301: 25%Recip: 10%S232: 50% |
| 7611.00.00.90 | Other | Free | 301: 25%Recip: 10%S232: 50% |
7612 — Aluminum casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
#Heading 7612 contains 9 HTS lines. General U.S. duty rates: Free–5.7%. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
7612
Aluminum casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment:
Free
7612.10.00.00
Collapsible tubular containers
2.4%
7612.90
Other:
Free
7612.90.10
Of a capacity not exceeding 20 liters
5.7%
7612.90.10.40
With a circular cross section, of a kind used for aerosols
Free
7612.90.10.45
Other
Free
7612.90.10.60
Cans of a capacity exceeding 355 ml but less than 3.8 liters
Free
7612.90.10.90
Other
Free
7612.90.50.00
Other
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7612 | Aluminum casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment: | Free | 301: 25%Recip: 10%S232: 50% |
| 7612.10.00.00 | Collapsible tubular containers | 2.4% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7612.90 | Other: | Free | 301: 25%Recip: 10%S232: 50% |
| 7612.90.10 | Of a capacity not exceeding 20 liters | 5.7% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7612.90.10.40 | With a circular cross section, of a kind used for aerosols | Free | 301: 25%Recip: 10%S232: 50% |
| 7612.90.10.45 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7612.90.10.60 | Cans of a capacity exceeding 355 ml but less than 3.8 liters | Free | 301: 25%Recip: 10%S232: 50% |
| 7612.90.10.90 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7612.90.50.00 | Other | Free | 301: 25%Recip: 10%S232: 50% |
7613 — Aluminum containers for compressed or liquefied gas
#Heading 7613 contains 1 HTS line. General U.S. duty rates: 5%. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7613.00.00.00 | Aluminum containers for compressed or liquefied gas | 5% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
7614 — Stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum, not electrically insulated
#Heading 7614 contains 10 HTS lines. General U.S. duty rates: Free–5.7%. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
7614
Stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum, not electrically insulated:
Free
7614.10
With steel core:
Free
7614.10.10.00
Not fitted with fittings and not made up into articles
4.9%
7614.10.50.00
Fitted with fittings or made up into articles
4.9%
7614.90
Other:
Free
7614.90.20
Electrical conductors
4.9%
7614.90.20.30
With a cross-sectional area less than 240 mm²
Free
7614.90.20.60
With a cross-sectional area greater than or equal to 240 mm²
Free
7614.90.40.00
Other
4.9%
7614.90.50.00
Fitted with fittings or made up into articles
5.7%
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7614 | Stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum, not electrically insulated: | Free | 301: 25%Recip: 10%S232: 50% |
| 7614.10 | With steel core: | Free | 301: 25%Recip: 10%S232: 50% |
| 7614.10.10.00 | Not fitted with fittings and not made up into articles | 4.9% | 301: 25%Recip: 10%hts_special: Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG) |
| 7614.10.50.00 | Fitted with fittings or made up into articles | 4.9% | 301: 25%Recip: 10%hts_special: Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7614.90 | Other: | Free | 301: 25%Recip: 10%S232: 50% |
| 7614.90.20 | Electrical conductors | 4.9% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7614.90.20.30 | With a cross-sectional area less than 240 mm² | Free | 301: 25%Recip: 10%S232: 50% |
| 7614.90.20.60 | With a cross-sectional area greater than or equal to 240 mm² | Free | 301: 25%Recip: 10%S232: 50% |
| 7614.90.40.00 | Other | 4.9% | 301: 25%Recip: 10%hts_special: Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG) |
| 7614.90.50.00 | Fitted with fittings or made up into articles | 5.7% | 301: 25%Recip: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
7615 — Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum
#Heading 7615 contains 19 HTS lines. General U.S. duty rates: Free–3.8%. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
7615
Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum:
Free
7615.10
Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like:
Free
7615.10.11.00
Pot scourers and scouring or polishing pads, gloves and the like
3.1%
7615.10.20
Cast
3.1%
7615.10.20.15
Bakeware (cookware not suitable for stove top use)
Free
7615.10.20.25
Other
Free
7615.10.30
Other
3.1%
7615.10.30.15
Bakeware (cookware not suitable for stove top use)
Free
7615.10.30.25
Other
Free
7615.10.50
Cast
3.1%
7615.10.50.20
Bakeware (cookware not suitable for stove top use)
Free
7615.10.50.40
Other
Free
7615.10.71
Other
3.1%
7615.10.71.25
Containers suitable for food preparation, baking, reheating or storage, 0.04 mm or more but not over 0.22 mm in thickness
Free
7615.10.71.30
Bakeware (cookware not suitable for stove top use)
Free
7615.10.71.55
Other
Free
7615.10.71.80
Other
Free
7615.10.91.00
Other
3.1%
7615.20.00.00
Sanitary ware and parts thereof
3.8%
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7615 | Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum: | Free | 301: 25%Recip: 10%S232: 50% |
| 7615.10 | Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like: | Free | 301: 25%Recip: 10%S232: 50% |
| 7615.10.11.00 | Pot scourers and scouring or polishing pads, gloves and the like | 3.1% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7615.10.20 | Cast | 3.1% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7615.10.20.15 | Bakeware (cookware not suitable for stove top use) | Free | 301: 25%Recip: 10%S232: 50% |
| 7615.10.20.25 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7615.10.30 | Other | 3.1% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7615.10.30.15 | Bakeware (cookware not suitable for stove top use) | Free | 301: 25%Recip: 10%S232: 50% |
| 7615.10.30.25 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7615.10.50 | Cast | 3.1% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7615.10.50.20 | Bakeware (cookware not suitable for stove top use) | Free | 301: 25%Recip: 10%S232: 50% |
| 7615.10.50.40 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7615.10.71 | Other | 3.1% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7615.10.71.25 | Containers suitable for food preparation, baking, reheating or storage, 0.04 mm or more but not over 0.22 mm in thickness | Free | 301: 25%Recip: 10%S232: 50% |
| 7615.10.71.30 | Bakeware (cookware not suitable for stove top use) | Free | 301: 25%Recip: 10%S232: 50% |
| 7615.10.71.55 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7615.10.71.80 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7615.10.91.00 | Other | 3.1% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7615.20.00.00 | Sanitary ware and parts thereof | 3.8% | 301: 25%Recip: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
7616 — Other articles of aluminum
#Heading 7616 contains 23 HTS lines. General U.S. duty rates: Free–6%. Section 301 surcharges (25%) and reciprocal tariffs (10%) apply to selected lines.
7616
Other articles of aluminum:
Free
7616.10
Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles:
Free
7616.10.10.00
Nails, tacks and staples
5.7%
7616.10.30.00
Rivets
4.7%
7616.10.50.00
Cotters and cotter pins
5.7%
7616.10.70
Having shanks, threads or holes over 6 mm in diameter
5.5%
7616.10.70.30
Threaded fasteners
Free
7616.10.70.90
Other
Free
7616.10.90
Other
6%
7616.10.90.30
Threaded fasteners
Free
7616.10.90.90
Other
Free
7616.91.00.00
Cloth, grill, netting and fencing, of aluminum wire
2.5%
7616.99
Other:
Free
7616.99.10.00
Luggage frames
Free
7616.99.51
Other
2.5%
7616.99.51.20
Laminated goods consisting of 2 or more flat-rolled sheets of aluminum held together with an adhesive or having a core of non-metallic material
Free
7616.99.51.30
Ladders
Free
7616.99.51.40
Venetian blinds and parts thereof
Free
7616.99.51.50
Hangers and supports for pipes and tubes
Free
7616.99.51.60
Castings
Free
7616.99.51.70
Forgings
Free
7616.99.51.75
Articles of wire
Free
7616.99.51.90
Other
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7616 | Other articles of aluminum: | Free | 301: 25%Recip: 10%S232: 50% |
| 7616.10 | Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles: | Free | 301: 25%Recip: 10%S232: 50% |
| 7616.10.10.00 | Nails, tacks and staples | 5.7% | 301: 25%Recip: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7616.10.30.00 | Rivets | 4.7% | 301: 25%Recip: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7616.10.50.00 | Cotters and cotter pins | 5.7% | 301: 25%Recip: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7616.10.70 | Having shanks, threads or holes over 6 mm in diameter | 5.5% | 301: 25%Recip: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 2.75% (JP) |
| 7616.10.70.30 | Threaded fasteners | Free | 301: 25%Recip: 10%S232: 50% |
| 7616.10.70.90 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7616.10.90 | Other | 6% | 301: 25%Recip: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7616.10.90.30 | Threaded fasteners | Free | 301: 25%Recip: 10%S232: 50% |
| 7616.10.90.90 | Other | Free | 301: 25%Recip: 10%S232: 50% |
| 7616.91.00.00 | Cloth, grill, netting and fencing, of aluminum wire | 2.5% | 301: 25%Recip: 10%hts_special: Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7616.99 | Other: | Free | 301: 25%Recip: 10%S232: 50% |
| 7616.99.10.00 | Luggage frames | Free | 301: 25%Recip: 10%S232: 50% |
| 7616.99.51 | Other | 2.5% | 301: 25%Recip: 10%hts_special: Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7616.99.51.20 | Laminated goods consisting of 2 or more flat-rolled sheets of aluminum held together with an adhesive or having a core of non-metallic material | Free | 301: 25%Recip: 10%S232: 50% |
| 7616.99.51.30 | Ladders | Free | 301: 25%Recip: 10%S232: 50% |
| 7616.99.51.40 | Venetian blinds and parts thereof | Free | 301: 25%Recip: 10%S232: 50% |
| 7616.99.51.50 | Hangers and supports for pipes and tubes | Free | 301: 25%Recip: 10%S232: 50% |
| 7616.99.51.60 | Castings | Free | 301: 25%Recip: 10%S232: 50% |
| 7616.99.51.70 | Forgings | Free | 301: 25%Recip: 10%S232: 50% |
| 7616.99.51.75 | Articles of wire | Free | 301: 25%Recip: 10%S232: 50% |
| 7616.99.51.90 | Other | Free | 301: 25%Recip: 10%S232: 50% |
Frequently Asked Questions — Chapter 76
Sources & Methodology
- Base HTS rates: U.S. International Trade Commission — Harmonized Tariff Schedule (2025 edition, Chapter 76). “General rate” shows the min–max range across all 10-digit subheadings.
- Section 301 rates: Office of the U.S. Trade Representative — Section 301 action lists. Flags indicate HTS lines listed on USTR China 301 Lists 1–4B.
- Reciprocal tariffs: Based on the post-SCOTUS Section 122 framework (February 2026). See the TariffCenter Tariff Tracker for current program status.
- Verify before importing: U.S. Customs and Border Protection — Rulings Online or consult a licensed customs broker for binding classification rulings.
Glossary
- General rate (MFN rate)
- The base import duty applied to all World Trade Organization members under Most-Favored-Nation treatment. This is the standard rate shown in the General Rate column.
- Section 301 tariff (301: 25%)
- An additional surcharge authorized under Section 301 of the Trade Act of 1974, imposed on selected imports from China. The most common rate is 25%; some products carry 7.5%. Applied on top of the MFN base rate.
- Reciprocal tariff (Recip: 10%)
- Tariffs applied under the post-February 2026 SCOTUS ruling upholding Section 122 authority. Typically 10–25% depending on country of origin, stacked on top of base and Section 301 rates.
- Section 232 tariff (S232: 25%)
- Tariffs on steel and aluminum products (and downstream derivatives) imposed under Section 232 of the Trade Expansion Act of 1962 on national security grounds.
- hts_special / Special rates
- Preferential duty rates available to imports from countries with Free Trade Agreements or other special trade programs with the U.S. Country codes: AU (Australia), BH (Bahrain), CA (Canada), CL (Chile), CO (Colombia), IL (Israel), JO (Jordan), KR (South Korea), MA (Morocco), MX (Mexico), OM (Oman), PA (Panama), PE (Peru), SG (Singapore). Free (AU,BH...) means duty-free treatment for those partners.