Chapter 74
Copper and Articles Thereof
By TariffCenter Research Team · Updated 2026-04-09 · Source: USITC Harmonized Tariff Schedule
At a glance
Chapter 74 contains 192 HTS lines covering copper and articles thereof. General U.S. duty rates: Free to 3%. Section 301 surcharges apply on selected lines for imports from China. Reciprocal tariffs apply following the February 2026 SCOTUS ruling.
7401 — Copper mattes; cement copper (precipitated copper)
#Heading 7401 contains 1 HTS line. General U.S. duty rates: Free. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7401.00.00.00 | Copper mattes; cement copper (precipitated copper) | Free | 301: 25%S122: 10% |
7402 — Unrefined copper; copper anodes for electrolytic refining
#Heading 7402 contains 1 HTS line. General U.S. duty rates: Free. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7402.00.00.00 | Unrefined copper; copper anodes for electrolytic refining | Free | 301: 25%S122: 10% |
7403 — Refined copper and copper alloys, unwrought (other than master alloys of heading 7405)
#Heading 7403 contains 10 HTS lines. General U.S. duty rates: Free–1%. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
7403
Refined copper and copper alloys, unwrought (other than master alloys of heading 7405):
Free
7403.11.00.00
Cathodes and sections of cathodes
1%
7403.12.00.00
Wire bars
1%
7403.13.00.00
Billets
1%
7403.19.00.00
Other
1%
7403.21.00.00
Copper-zinc base alloys (brass)
1%
7403.22.00.00
Copper-tin base alloys (bronze)
1%
7403.29.01
Other copper alloys
1%
7403.29.01.10
Copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
Free
7403.29.01.80
Other
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7403 | Refined copper and copper alloys, unwrought (other than master alloys of heading 7405): | Free | 301: 25%S122: 10% |
| 7403.11.00.00 | Cathodes and sections of cathodes | 1% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7403.12.00.00 | Wire bars | 1% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7403.13.00.00 | Billets | 1% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7403.19.00.00 | Other | 1% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7403.21.00.00 | Copper-zinc base alloys (brass) | 1% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7403.22.00.00 | Copper-tin base alloys (bronze) | 1% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7403.29.01 | Other copper alloys | 1% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7403.29.01.10 | Copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | Free | 301: 25%S122: 10% |
| 7403.29.01.80 | Other | Free | 301: 25%S122: 10% |
7404 — Copper waste and scrap
#Heading 7404 contains 13 HTS lines. General U.S. duty rates: Free. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
7404.00
Copper waste and scrap:
Free
7404.00.30
Spent anodes; waste and scrap with a copper content of less than 94 percent by weight
Free
7404.00.30.20
Of refined copper
Free
7404.00.30.45
Containing more than 0.3 percent of lead
Free
7404.00.30.55
Other
Free
7404.00.30.65
Of copper-tin base alloys (bronze)
Free
7404.00.30.90
Other
Free
7404.00.60
Other
Free
7404.00.60.20
Of refined copper
Free
7404.00.60.45
Containing more than 0.3 percent of lead
Free
7404.00.60.55
Other
Free
7404.00.60.65
Of copper-tin base alloys (bronze)
Free
7404.00.60.90
Other
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7404.00 | Copper waste and scrap: | Free | 301: 25%S122: 10% |
| 7404.00.30 | Spent anodes; waste and scrap with a copper content of less than 94 percent by weight | Free | 301: 25%S122: 10% |
| 7404.00.30.20 | Of refined copper | Free | 301: 25%S122: 10% |
| 7404.00.30.45 | Containing more than 0.3 percent of lead | Free | 301: 25%S122: 10% |
| 7404.00.30.55 | Other | Free | 301: 25%S122: 10% |
| 7404.00.30.65 | Of copper-tin base alloys (bronze) | Free | 301: 25%S122: 10% |
| 7404.00.30.90 | Other | Free | 301: 25%S122: 10% |
| 7404.00.60 | Other | Free | 301: 25%S122: 10% |
| 7404.00.60.20 | Of refined copper | Free | 301: 25%S122: 10% |
| 7404.00.60.45 | Containing more than 0.3 percent of lead | Free | 301: 25%S122: 10% |
| 7404.00.60.55 | Other | Free | 301: 25%S122: 10% |
| 7404.00.60.65 | Of copper-tin base alloys (bronze) | Free | 301: 25%S122: 10% |
| 7404.00.60.90 | Other | Free | 301: 25%S122: 10% |
7405 — Master alloys of copper
#Heading 7405 contains 5 HTS lines. General U.S. duty rates: Free. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
7405.00
Master alloys of copper:
Free
7405.00.10.00
Containing by weight 5 percent or more but not more than 15 percent of phosphorus
Free
7405.00.60
Other
Free
7405.00.60.30
Beryllium copper master alloy
Free
7405.00.60.50
Other
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7405.00 | Master alloys of copper: | Free | 301: 25%S122: 10% |
| 7405.00.10.00 | Containing by weight 5 percent or more but not more than 15 percent of phosphorus | Free | 301: 25%S122: 10% |
| 7405.00.60 | Other | Free | 301: 25%S122: 10% |
| 7405.00.60.30 | Beryllium copper master alloy | Free | 301: 25%S122: 10% |
| 7405.00.60.50 | Other | Free | 301: 25%S122: 10% |
7406 — Copper powders and flakes
#Heading 7406 contains 3 HTS lines. General U.S. duty rates: Free. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
7406
Copper powders and flakes:
Free
7406.10.00.00
Powders of non-lamellar structure
Free
7406.20.00.00
Powders of lamellar structure; flakes
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7406 | Copper powders and flakes: | Free | 301: 25%S122: 10% |
| 7406.10.00.00 | Powders of non-lamellar structure | Free | 301: 25%S122: 10% |
| 7406.20.00.00 | Powders of lamellar structure; flakes | Free | 301: 25%S122: 10% |
7407 — Copper bars, rods and profiles
#Heading 7407 contains 21 HTS lines. General U.S. duty rates: Free–3%. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
7407
Copper bars, rods and profiles:
Free
7407.10
Of refined copper:
Free
7407.10.15.00
Hollow profiles
3%
7407.10.30.00
Other
3%
7407.10.50
Bars and rods
1%
7407.10.50.10
Having a rectangular cross section
Free
7407.10.50.50
Other
Free
7407.21
Of copper-zinc base alloys (brass):
Free
7407.21.15.00
Hollow profiles
2.2%
7407.21.30.00
Other
2.2%
7407.21.50.00
Low fuming brazing rods
2.2%
7407.21.70.00
Having a rectangular cross section
1.9%
7407.21.90.00
Other
2.2%
7407.29
Other:
Free
7407.29.16
Hollow
3%
7407.29.16.10
Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
Free
7407.29.16.80
Other
Free
7407.29.34.00
Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
3%
7407.29.38.00
Other
3%
7407.29.40.00
Bars and rods of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
3%
7407.29.50.00
Other bars and rods
1.6%
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7407 | Copper bars, rods and profiles: | Free | 301: 25%S122: 10% |
| 7407.10 | Of refined copper: | Free | 301: 25%S122: 10% |
| 7407.10.15.00 | Hollow profiles | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7407.10.30.00 | Other | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7407.10.50 | Bars and rods | 1% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7407.10.50.10 | Having a rectangular cross section | Free | 301: 25%S122: 10% |
| 7407.10.50.50 | Other | Free | 301: 25%S122: 10% |
| 7407.21 | Of copper-zinc base alloys (brass): | Free | 301: 25%S122: 10% |
| 7407.21.15.00 | Hollow profiles | 2.2% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7407.21.30.00 | Other | 2.2% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7407.21.50.00 | Low fuming brazing rods | 2.2% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7407.21.70.00 | Having a rectangular cross section | 1.9% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7407.21.90.00 | Other | 2.2% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7407.29 | Other: | Free | 301: 25%S122: 10% |
| 7407.29.16 | Hollow | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7407.29.16.10 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | Free | 301: 25%S122: 10% |
| 7407.29.16.80 | Other | Free | 301: 25%S122: 10% |
| 7407.29.34.00 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7407.29.38.00 | Other | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7407.29.40.00 | Bars and rods of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7407.29.50.00 | Other bars and rods | 1.6% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
7408 — Copper wire
#Heading 7408 contains 14 HTS lines. General U.S. duty rates: Free–3%. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
7408
Copper wire:
Free
7408.11
Of which the maximum cross-sectional dimension exceeds 6 mm:
Free
7408.11.30.00
With a maximum cross-sectional dimension over 9.5 mm
1%
7408.11.60.00
With a maximum cross-sectional dimension over 6 mm but not over 9.5 mm
3%
7408.19.00
Other
3%
7408.19.00.30
With a maximum cross-sectional dimension of 3 mm or less
Free
7408.19.00.60
Other
Free
7408.21.00.00
Of copper-zinc base alloys (brass)
3%
7408.22
Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver):
Free
7408.22.10.00
Coated or plated with metal
3%
7408.22.50.00
Not coated or plated with metal
3%
7408.29
Other:
Free
7408.29.10.00
Coated or plated with metal
3%
7408.29.50.00
Not coated or plated with metal
3%
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7408 | Copper wire: | Free | 301: 25%S122: 10% |
| 7408.11 | Of which the maximum cross-sectional dimension exceeds 6 mm: | Free | 301: 25%S122: 10% |
| 7408.11.30.00 | With a maximum cross-sectional dimension over 9.5 mm | 1% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7408.11.60.00 | With a maximum cross-sectional dimension over 6 mm but not over 9.5 mm | 3% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7408.19.00 | Other | 3% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7408.19.00.30 | With a maximum cross-sectional dimension of 3 mm or less | Free | 301: 25%S122: 10% |
| 7408.19.00.60 | Other | Free | 301: 25%S122: 10% |
| 7408.21.00.00 | Of copper-zinc base alloys (brass) | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7408.22 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver): | Free | 301: 25%S122: 10% |
| 7408.22.10.00 | Coated or plated with metal | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7408.22.50.00 | Not coated or plated with metal | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7408.29 | Other: | Free | 301: 25%S122: 10% |
| 7408.29.10.00 | Coated or plated with metal | 3% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7408.29.50.00 | Not coated or plated with metal | 3% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
7409 — Copper plates, sheets and strip, of a thickness exceeding 0.15 mm
#Heading 7409 contains 43 HTS lines. General U.S. duty rates: Free–3%. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
7409
Copper plates, sheets and strip, of a thickness exceeding 0.15 mm:
Free
7409.11
In coils:
Free
7409.11.10.00
Of a thickness of 5 mm or more
3%
7409.11.50
Of a thickness of less than 5 mm
1%
7409.11.50.10
Of a width of 500 mm or more
Free
7409.11.50.50
Of a width of less than 500 mm
Free
7409.19
Other:
Free
7409.19.10.00
Of a thickness of 5 mm or more
3%
7409.19.50.00
Of a width of 500 mm or more
1%
7409.19.90.00
Of a width of less than 500 mm
3%
7409.21.00
In coils
1.9%
7409.21.00.10
Of a thickness of 5 mm or more
Free
7409.21.00.50
Of a width of 500 mm or more
Free
7409.21.00.75
Of a thickness less than 1.6 mm
Free
7409.21.00.90
Other
Free
7409.29.00
Other
1.9%
7409.29.00.10
Of a thickness of 5 mm or more
Free
7409.29.00.50
Of a width of 500 mm or more
Free
7409.29.00.75
Of a thickness less than 1.6 mm
Free
7409.29.00.90
Other
Free
7409.31
In coils:
Free
7409.31.10.00
Of a thickness of 5 mm or more
3%
7409.31.50.00
Of a width of 500 mm or more
1.7%
7409.31.90.00
Of a width of less than 500 mm
3%
7409.39
Other:
Free
7409.39.10
Of a thickness of 5 mm or more
3%
7409.39.10.30
Of phosphor bronze
Free
7409.39.10.60
Other
Free
7409.39.50.00
Of a width of 500 mm or more
1.7%
7409.39.90
Of a width of less than 500 mm
3%
7409.39.90.30
Of phosphor bronze
Free
7409.39.90.60
Other
Free
7409.40.00.00
Of copper-nickel base alloys (cupro-nickel) or copper- nickel-zinc base alloys (nickel silver)
3%
7409.90
Of other copper alloys:
Free
7409.90.10
Of a thickness of 5 mm or more
3%
7409.90.10.30
Of beryllium copper
Free
7409.90.10.60
Other
Free
7409.90.50
Of a width of 500 mm or more
1.7%
7409.90.50.30
Of beryllium copper
Free
7409.90.50.60
Other
Free
7409.90.90
Of a width of less than 500 mm
3%
7409.90.90.30
Of beryllium copper
Free
7409.90.90.60
Other
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7409 | Copper plates, sheets and strip, of a thickness exceeding 0.15 mm: | Free | 301: 25%S122: 10% |
| 7409.11 | In coils: | Free | 301: 25%S122: 10% |
| 7409.11.10.00 | Of a thickness of 5 mm or more | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.11.50 | Of a thickness of less than 5 mm | 1% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.11.50.10 | Of a width of 500 mm or more | Free | 301: 25%S122: 10% |
| 7409.11.50.50 | Of a width of less than 500 mm | Free | 301: 25%S122: 10% |
| 7409.19 | Other: | Free | 301: 25%S122: 10% |
| 7409.19.10.00 | Of a thickness of 5 mm or more | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.19.50.00 | Of a width of 500 mm or more | 1% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.19.90.00 | Of a width of less than 500 mm | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.21.00 | In coils | 1.9% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.21.00.10 | Of a thickness of 5 mm or more | Free | 301: 25%S122: 10% |
| 7409.21.00.50 | Of a width of 500 mm or more | Free | 301: 25%S122: 10% |
| 7409.21.00.75 | Of a thickness less than 1.6 mm | Free | 301: 25%S122: 10% |
| 7409.21.00.90 | Other | Free | 301: 25%S122: 10% |
| 7409.29.00 | Other | 1.9% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.29.00.10 | Of a thickness of 5 mm or more | Free | 301: 25%S122: 10% |
| 7409.29.00.50 | Of a width of 500 mm or more | Free | 301: 25%S122: 10% |
| 7409.29.00.75 | Of a thickness less than 1.6 mm | Free | 301: 25%S122: 10% |
| 7409.29.00.90 | Other | Free | 301: 25%S122: 10% |
| 7409.31 | In coils: | Free | 301: 25%S122: 10% |
| 7409.31.10.00 | Of a thickness of 5 mm or more | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.31.50.00 | Of a width of 500 mm or more | 1.7% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.31.90.00 | Of a width of less than 500 mm | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.39 | Other: | Free | 301: 25%S122: 10% |
| 7409.39.10 | Of a thickness of 5 mm or more | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.39.10.30 | Of phosphor bronze | Free | 301: 25%S122: 10% |
| 7409.39.10.60 | Other | Free | 301: 25%S122: 10% |
| 7409.39.50.00 | Of a width of 500 mm or more | 1.7% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.39.90 | Of a width of less than 500 mm | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.39.90.30 | Of phosphor bronze | Free | 301: 25%S122: 10% |
| 7409.39.90.60 | Other | Free | 301: 25%S122: 10% |
| 7409.40.00.00 | Of copper-nickel base alloys (cupro-nickel) or copper- nickel-zinc base alloys (nickel silver) | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.90 | Of other copper alloys: | Free | 301: 25%S122: 10% |
| 7409.90.10 | Of a thickness of 5 mm or more | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.90.10.30 | Of beryllium copper | Free | 301: 25%S122: 10% |
| 7409.90.10.60 | Other | Free | 301: 25%S122: 10% |
| 7409.90.50 | Of a width of 500 mm or more | 1.7% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.90.50.30 | Of beryllium copper | Free | 301: 25%S122: 10% |
| 7409.90.50.60 | Other | Free | 301: 25%S122: 10% |
| 7409.90.90 | Of a width of less than 500 mm | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7409.90.90.30 | Of beryllium copper | Free | 301: 25%S122: 10% |
| 7409.90.90.60 | Other | Free | 301: 25%S122: 10% |
7410 — Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.15 mm
#Heading 7410 contains 12 HTS lines. General U.S. duty rates: Free–3%. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
7410
Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.15 mm:
Free
7410.11.00.00
Of refined copper
1%
7410.12.00
Of copper alloys
1%
7410.12.00.30
Of copper-zinc base alloys (brass)
Free
7410.12.00.60
Other
Free
7410.21
Of refined copper:
Free
7410.21.30
Copper clad laminates
3%
7410.21.30.20
Having copper on one side only
Free
7410.21.30.40
Having copper on both sides
Free
7410.21.30.60
Other
Free
7410.21.60.00
Other
1.5%
7410.22.00.00
Of copper alloys
1.5%
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7410 | Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.15 mm: | Free | 301: 25%S122: 10% |
| 7410.11.00.00 | Of refined copper | 1% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG) |
| 7410.12.00 | Of copper alloys | 1% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG) |
| 7410.12.00.30 | Of copper-zinc base alloys (brass) | Free | 301: 25%S122: 10% |
| 7410.12.00.60 | Other | Free | 301: 25%S122: 10% |
| 7410.21 | Of refined copper: | Free | 301: 25%S122: 10% |
| 7410.21.30 | Copper clad laminates | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG) |
| 7410.21.30.20 | Having copper on one side only | Free | 301: 25%S122: 10% |
| 7410.21.30.40 | Having copper on both sides | Free | 301: 25%S122: 10% |
| 7410.21.30.60 | Other | Free | 301: 25%S122: 10% |
| 7410.21.60.00 | Other | 1.5% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG) |
| 7410.22.00.00 | Of copper alloys | 1.5% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG) |
7411 — Copper tubes and pipes
#Heading 7411 contains 13 HTS lines. General U.S. duty rates: Free–3%. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
7411
Copper tubes and pipes:
Free
7411.10
Of refined copper:
Free
7411.10.10
Seamless
1.5%
7411.10.10.30
Having an outside diameter of 6 mm or more but not exceeding 16 mm, in coils on spools
Free
7411.10.10.90
Other
Free
7411.10.50.00
Other
3%
7411.21
Of copper-zinc base alloys (brass):
Free
7411.21.10.00
Seamless
1.4%
7411.21.50.00
Other
3%
7411.22.00.00
Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel-silver)
3%
7411.29
Other:
Free
7411.29.10.00
Seamless
1.4%
7411.29.50.00
Other
3%
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7411 | Copper tubes and pipes: | Free | 301: 25%S122: 10% |
| 7411.10 | Of refined copper: | Free | 301: 25%S122: 10% |
| 7411.10.10 | Seamless | 1.5% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7411.10.10.30 | Having an outside diameter of 6 mm or more but not exceeding 16 mm, in coils on spools | Free | 301: 25%S122: 10% |
| 7411.10.10.90 | Other | Free | 301: 25%S122: 10% |
| 7411.10.50.00 | Other | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7411.21 | Of copper-zinc base alloys (brass): | Free | 301: 25%S122: 10% |
| 7411.21.10.00 | Seamless | 1.4% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7411.21.50.00 | Other | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7411.22.00.00 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel-silver) | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7411.29 | Other: | Free | 301: 25%S122: 10% |
| 7411.29.10.00 | Seamless | 1.4% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7411.29.50.00 | Other | 3% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
7412 — Copper tube or pipe fittings (for example couplings, elbows, sleeves)
#Heading 7412 contains 10 HTS lines. General U.S. duty rates: Free–3%. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
7412
Copper tube or pipe fittings (for example couplings, elbows, sleeves):
Free
7412.10.00.00
Of refined copper
3%
7412.20.00
Of copper alloys
3%
7412.20.00.15
For brake hoses for vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29 or headings 8702, 8703, 8704, or 8705
Free
7412.20.00.25
Nipples
Free
7412.20.00.35
Other
Free
7412.20.00.45
Other
Free
7412.20.00.65
Nipples
Free
7412.20.00.85
Other
Free
7412.20.00.90
Other
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7412 | Copper tube or pipe fittings (for example couplings, elbows, sleeves): | Free | 301: 25%S122: 10% |
| 7412.10.00.00 | Of refined copper | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7412.20.00 | Of copper alloys | 3% | 301: 25%S122: 10%hts_special: Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7412.20.00.15 | For brake hoses for vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29 or headings 8702, 8703, 8704, or 8705 | Free | 301: 25%S122: 10% |
| 7412.20.00.25 | Nipples | Free | 301: 25%S122: 10% |
| 7412.20.00.35 | Other | Free | 301: 25%S122: 10% |
| 7412.20.00.45 | Other | Free | 301: 25%S122: 10% |
| 7412.20.00.65 | Nipples | Free | 301: 25%S122: 10% |
| 7412.20.00.85 | Other | Free | 301: 25%S122: 10% |
| 7412.20.00.90 | Other | Free | 301: 25%S122: 10% |
7413 — Stranded wire, cables, plaited bands and the like, including slings and similar articles, of copper, not electrically insulated
#Heading 7413 contains 4 HTS lines. General U.S. duty rates: Free–3%. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
7413.00
Stranded wire, cables, plaited bands and the like, including slings and similar articles, of copper, not electrically insulated:
Free
7413.00.10.00
Stranded wire
3%
7413.00.50.00
Other
2%
7413.00.90.00
Fitted with fittings or made up into articles
3%
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7413.00 | Stranded wire, cables, plaited bands and the like, including slings and similar articles, of copper, not electrically insulated: | Free | 301: 25%S122: 10% |
| 7413.00.10.00 | Stranded wire | 3% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7413.00.50.00 | Other | 2% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7413.00.90.00 | Fitted with fittings or made up into articles | 3% | 301: 25%S122: 10%hts_special: Free (A*,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
7415 — Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper
#Heading 7415 contains 11 HTS lines. General U.S. duty rates: Free–3%. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
7415
Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper:
Free
7415.10.00.00
Nails and tacks, drawing pins, staples and similar articles
2.5%
7415.21.00.00
Washers (including spring washers)
3%
7415.29.00.00
Other
3%
7415.33
Screws, bolts and nuts:
Free
7415.33.05.00
Screws for wood
3%
7415.33.10.00
Muntz or yellow metal bolts
1.4%
7415.33.80
Other screws and bolts; nuts
3%
7415.33.80.10
Having shanks, threads or holes 6 mm or more in diameter
Free
7415.33.80.50
Having shanks, threads or holes less than 6 mm in diameter
Free
7415.39.00.00
Other
3%
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7415 | Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper: | Free | 301: 25%S122: 10% |
| 7415.10.00.00 | Nails and tacks, drawing pins, staples and similar articles | 2.5% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7415.21.00.00 | Washers (including spring washers) | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7415.29.00.00 | Other | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7415.33 | Screws, bolts and nuts: | Free | 301: 25%S122: 10% |
| 7415.33.05.00 | Screws for wood | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7415.33.10.00 | Muntz or yellow metal bolts | 1.4% | 301: 25%S122: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7415.33.80 | Other screws and bolts; nuts | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7415.33.80.10 | Having shanks, threads or holes 6 mm or more in diameter | Free | 301: 25%S122: 10% |
| 7415.33.80.50 | Having shanks, threads or holes less than 6 mm in diameter | Free | 301: 25%S122: 10% |
| 7415.39.00.00 | Other | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
7418 — Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper
#Heading 7418 contains 14 HTS lines. General U.S. duty rates: Free–3%. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
7418
Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper:
Free
7418.10.00
Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like
3%
7418.10.00.02
Of copper-zinc base alloys (brass)
Free
7418.10.00.04
Other
Free
7418.10.00.19
Coated or plated with precious metals
Free
7418.10.00.21
Cooking or heating apparatus of a kind used for domestic purposes, non- electric and parts thereof
Free
7418.10.00.23
Cooking and kitchen ware
Free
7418.10.00.25
Other
Free
7418.10.00.51
Cooking or heating apparatus of a kind used for domestic purposes, non- electric and parts thereof
Free
7418.10.00.53
Cooking and kitchen ware
Free
7418.10.00.55
Other
Free
7418.20
Sanitary ware and parts thereof:
Free
7418.20.10.00
Of copper-zinc base alloys (brass)
3%
7418.20.50.00
Other
3%
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7418 | Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper: | Free | 301: 25%S122: 10% |
| 7418.10.00 | Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like | 3% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7418.10.00.02 | Of copper-zinc base alloys (brass) | Free | 301: 25%S122: 10% |
| 7418.10.00.04 | Other | Free | 301: 25%S122: 10% |
| 7418.10.00.19 | Coated or plated with precious metals | Free | 301: 25%S122: 10% |
| 7418.10.00.21 | Cooking or heating apparatus of a kind used for domestic purposes, non- electric and parts thereof | Free | 301: 25%S122: 10% |
| 7418.10.00.23 | Cooking and kitchen ware | Free | 301: 25%S122: 10% |
| 7418.10.00.25 | Other | Free | 301: 25%S122: 10% |
| 7418.10.00.51 | Cooking or heating apparatus of a kind used for domestic purposes, non- electric and parts thereof | Free | 301: 25%S122: 10% |
| 7418.10.00.53 | Cooking and kitchen ware | Free | 301: 25%S122: 10% |
| 7418.10.00.55 | Other | Free | 301: 25%S122: 10% |
| 7418.20 | Sanitary ware and parts thereof: | Free | 301: 25%S122: 10% |
| 7418.20.10.00 | Of copper-zinc base alloys (brass) | 3% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7418.20.50.00 | Other | 3% | 301: 25%S122: 10%hts_special: Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
7419 — Other articles of copper
#Heading 7419 contains 17 HTS lines. General U.S. duty rates: Free–3%. Section 301 surcharges (7.5%–100%) and Section 122 surcharge (15%) apply to selected lines.
7419
Other articles of copper:
Free
7419.20.00
Cast, molded, stamped or forged, but not further worked
Free
7419.20.00.10
Brass plumbing goods, not elsewhere specified or included
Free
7419.20.00.50
Other
Free
7419.80
Other:
Free
7419.80.03.00
Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with 94 or more wires to the lineal centimeter
Free
7419.80.06
Other
3%
7419.80.06.60
Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with fewer than 94 or more wires to the lineal centimeter
Free
7419.80.06.80
Other
Free
7419.80.09.00
Other
3%
7419.80.15.00
Containers of a kind normally carried on the person, in the pocket or in the handbag
3%
7419.80.16.00
Copper springs
3%
7419.80.17.00
Chain and parts thereof
3%
7419.80.30.00
Coated or plated with precious metal
3%
7419.80.50
Other
Free
7419.80.50.10
Brass plumbing goods not elsewhere specified or included
Free
7419.80.50.50
Other
Free
| HS Code | Description | General Rate | Special Rates |
|---|---|---|---|
| 7419 | Other articles of copper: | Free | 301: 25%S122: 10% |
| 7419.20.00 | Cast, molded, stamped or forged, but not further worked | Free | 301: 25%S122: 10% |
| 7419.20.00.10 | Brass plumbing goods, not elsewhere specified or included | Free | 301: 25%S122: 10% |
| 7419.20.00.50 | Other | Free | 301: 25%S122: 10% |
| 7419.80 | Other: | Free | 301: 25%S122: 10% |
| 7419.80.03.00 | Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with 94 or more wires to the lineal centimeter | Free | 301: 25%S122: 10% |
| 7419.80.06 | Other | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7419.80.06.60 | Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with fewer than 94 or more wires to the lineal centimeter | Free | 301: 25%S122: 10% |
| 7419.80.06.80 | Other | Free | 301: 25%S122: 10% |
| 7419.80.09.00 | Other | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7419.80.15.00 | Containers of a kind normally carried on the person, in the pocket or in the handbag | 3% | 301: 25%S122: 10%hts_special: Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG) |
| 7419.80.16.00 | Copper springs | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7419.80.17.00 | Chain and parts thereof | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7419.80.30.00 | Coated or plated with precious metal | 3% | 301: 25%S122: 10%hts_special: Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) |
| 7419.80.50 | Other | Free | 301: 25%S122: 10% |
| 7419.80.50.10 | Brass plumbing goods not elsewhere specified or included | Free | 301: 25%S122: 10% |
| 7419.80.50.50 | Other | Free | 301: 25%S122: 10% |
Frequently Asked Questions — Chapter 74
Sources & Methodology
- Base HTS rates: U.S. International Trade Commission — Harmonized Tariff Schedule (2025 edition, Chapter 74). “General rate” shows the min–max range across all 10-digit subheadings.
- Section 301 rates: Office of the U.S. Trade Representative — Section 301 action lists. Flags indicate HTS lines listed on USTR China 301 Lists 1–4B.
- Reciprocal tariffs: Based on the post-SCOTUS Section 122 framework (February 2026). See the TariffCenter Tariff Tracker for current program status.
- Verify before importing: U.S. Customs and Border Protection — Rulings Online or consult a licensed customs broker for binding classification rulings.
Glossary
- General rate (MFN rate)
- The base import duty applied to all World Trade Organization members under Most-Favored-Nation treatment. This is the standard rate shown in the General Rate column.
- Section 301 tariff (301: 7.5%–100%)
- An additional surcharge authorized under Section 301 of the Trade Act of 1974, imposed on selected imports from China. Rates vary by product list and category: Lists 1–3 at 25%, List 4A at 7.5%, with four-year review increases up to 100% on strategic sectors (EVs, semiconductors, solar, medical equipment). Applied on top of the MFN base rate.
- Section 122 surcharge (Sec. 122: 15%)
- A 15% global surcharge on all imports enacted under Section 122 authority after the February 2026 SCOTUS ruling struck down IEEPA-based reciprocal tariffs. USMCA-qualifying goods are exempt. Stacked on top of base and Section 301 rates.
- Section 232 tariff (S232)
- Tariffs on qualifying steel, aluminum, copper, and derivative products imposed under Section 232 of the Trade Expansion Act of 1962 on national security grounds. Rates now vary by product bucket and current Chapter 99 treatment.
- hts_special / Special rates
- Preferential duty rates available to imports from countries with Free Trade Agreements or other special trade programs with the U.S. Country codes: AU (Australia), BH (Bahrain), CA (Canada), CL (Chile), CO (Colombia), IL (Israel), JO (Jordan), KR (South Korea), MA (Morocco), MX (Mexico), OM (Oman), PA (Panama), PE (Peru), SG (Singapore). Free (AU,BH...) means duty-free treatment for those partners.